Cruise on my 96 quit and trying to figure out what the issue is. It does not turn on when I push the ON button, no light, nothing. If I hook up my scanner and test the SC solenoids everything checks fine and the light then blinks when it cycles the respective solenoid. I checked the 2 wires on the brake switch and have no power coming to the switch, but do have when testing using the scanner. According to what I have found on here the yellow/red wire comes from the PCM, is this correct, does it run directly to the PCM? I tried to run a jumper and apply 12v to that wire at the brake switch and still no ON light, but a solenoid did click on the servo. Interesting thing is this started after I put a new steering box on, but don't see anything loose or out of place around it that I may have bumped.